Skip to content
Swimming pools · Water treatment · Waterproofing+962799777211
Kingdom Pillars Swimming Pools
EN
Get in touch
Flagship Tool

Pool Visualizer & Calculator

Currently limited to rectangular pools only, to ensure drawing and calculation accuracy. For oval or circular shapes, use the quick Pool Volume Calculator.

  1. 1 Pool Visualizer
  2. 2 Filter
  3. 3 Heating
  4. 4 Chlorine
  5. 5 Complete Pool System Designer

This is a connected series of engineering tools for planning the pool's mechanical system step by step, not calculators separate from one another.

Unit System:

Pool Dimensions

The actual water depth, not the wall height.

Leave empty if the pool has a constant depth.

How far the flat shallow floor extends before it starts sloping down. Leave at 0 for a pool that slopes for its entire length.

How far the flat deep floor extends back from the deep end. The sloped transition between the two flat zones is calculated automatically — you never need to enter a slope angle.

Derived from the Circulation System selected below, not independently editable: 0.15m below the finished top level for a Skimmer pool, or 0m (water level at the finished top/coping level) for an Overflow pool — the drawings show the water line at exactly this position.

Structural Shell Thicknesses (Adjustable Defaults)

These values are common planning defaults for estimation purposes only, not approved structural specifications. Adjust them to match your actual design if known.

Extra working space around the pool walls that is actually excavated to allow for construction and waterproofing; not a hidden excavation factor — adjust it or set it to zero based on your site.

Plan View (From Above)

Longitudinal Section

Cross / Front Section

This is an illustrative schematic, not a construction drawing — wall thicknesses in the drawing are not to precise scale.

The drawing and calculations here are estimates for preliminary planning and initial visualization only, and are not construction drawings, a final bill of quantities (BOQ), or a structural design. All construction quantities (excavation, concrete, waterproofing, tiling) are approximate and explicitly labeled as such in the results. Final engineering design requires an actual site visit and a structural design approved by our team.

Your shopping cart